Does playing a record on the wrong speed damage it?

Also Why are some records 33 and some 45? Beta to Blu-ray vs HD-DVD, companies have often put out competing formats. RCA, which failed miserably in the 1930s to release a 33 to the public went out to release a 45 RPM. The record was smaller than the other options. Ultimately, RCA released the format in order to directly compete with the Columbia Record 33.

Likewise Is it bad to leave a record spinning? Never place or pick up a vinyl record as the turntable platter is spinning. This will quickly scratch the underside of a record. Always wait for the platter to come to a complete stop before doing anything with the record.

Is it OK to leave a record on the turntable? While that sounds convenient, what you don’t know is that it can damage your vinyl record. … Leaving your record out of its sleeve will or on the turntable will expose it to dirt and dust. It will also increase the risk of damaging the record’s surface.

How do I make my record player slower?

Some turntables with have speed adjustment screws – check your owners manual to find out where. Usually, turning these screws clockwise with speed up the platter and anti-clockwise will slow it down. Once you’ve amended the screws, test again with a strobe disc or phone app until you get the speed you desire.

Why are 7-inch records 45 rpm? 7-inch format

The names are derived from its play speed, 45 rpm (revolutions per minute), and the standard diameter, 7 inches. The 7-inch 45 rpm record was released 31 March 1949, by RCA Victor as a smaller, more durable and higher-fidelity replacement for the 78 rpm shellac discs.

Are 45rpm records louder? According to audiophiles, the 45 RPM format sounds better because more musical data is fit into a smaller space than with 33 RPM records. … In theory, it all sounds well and good. It makes sense that a 45 RPM record sounds better than a 33 RPM record.

What speed do most records play at? Vinyl is pressed in one of 3 speeds: 33 1/3 Rotations Per Minute (RPM), 45 RPM, and 78 RPMs. The majority of 12-inch long play (LPs) are 33 1/3 RPMs, and most 7-inch extended play (EPs) or singles are 45 RPMs.

How long do vinyls last?

Your vinyl records can last anywhere from a year or two and up to well over 100 years. If you’re aiming for the latter, it really comes down to how well you care for your record collection.

Can the needle scratch a record? It does not. The needle, or stylus, is made of hard precious stone, and records are made of plastic. These stones are harder than the plastic, so they can withstand the rigors of an uneven surface.

How do records get warped?

Vinyl records warp because of extra weight, heat and direct sunlight. … When records heat up they become soft. After they are soft they will warp with virtually any pressure that is applied. Even without external heat, a vinyl record can warp from any extra weight or pressure that it is put under.

Are stacking records bad? Few mistakes can ruin a newfound vinyl enthusiasm quite like unintentionally damaging your new collection. For starters, avoid stacking your vinyl on top of one another, even if the records are wearing their jackets. Doing so could cause permanent damage to the vinyl records, which may include cracking or warping.

Is CD better than vinyl?

Sound Quality

From a technical standpoint, digital CD audio quality is clearly superior to vinyl. CDs have a better signal-to-noise ratio (i.e. there is less interference from hissing, turntable rumble, etc.), better stereo channel separation, and have no variation in playback speed.

Why is my record player slightly fast?

This problem is most often due to a belt that is improperly installed. If the belt slips out of the groove when the turntable is played and is able to ride up or down on the spindle, the platter will spin too fast. You’ll need to adjust the position of the belt on the inner ring of the platter.

Why is my record skipping? A common reason your records may skip is dust and dirt that gets into the grooves. While it may occur on old records due to storage, paper sleeves or dust in the environment, new records may also have dust or dirt. … You want to remove any dust or dirt from the record before playing it to prevent skipping.

Why do some 45 records have a big hole? A larger hole allowed the sudden rotational forces to be distributed over a greater distance (π x 1.5; about 4.712 inches), reducing wear and allowing the hole to stay rounder longer. This was especially important for the jukebox industry. In the 1930s, ’40s, and ’50s, jukeboxes were big, big business.

When did they stop making 45 rpm records?

In the 1990s, most record labels discontinued production of the 45 RPM vinyl record. As a result, the 45 quickly become a collectors item. Later, when a resurrection of interest in 45 RPM records began, many artists, especially those whose work had been largely unnoticed (“unsung”), became new marketing phenomena.

What are the most valuable 45 rpm records? The most valuable vinyl records on Earth, from The Beatles to The Sex Pistols

  • The Sex Pistols, God Save The Queen canceled single: $10,000 to $20,000. …
  • Frank Wilson, Do I Love You (Indeed I Do) 45 rpm in plain sleeve: $37,000. …
  • Aphex Twin, Caustic Window test pressing: $46,000.

Why do LPs sound better?

Because of their materiality, records offer sound qualities that digital formats do not. These include warmth, richness, and depth. Many people value those qualities and so hold vinyl records to sound better than digital formats.

Why are singles 45 rpm? In order to make the disc smaller than the 10-inch, 78-rpm discs used since the 1890s, they reduced the speed to 45-rpm and used a much finer groove. This meant that they could pack in more grooves in a smaller space.

How many grooves does a 33 rpm record have?

Two. One on the A side and one on the B side. Two – one on each side.

What are 45 rpm records? Answer: The 7-inch, 45 RPM record was introduced by RCA Victor in 1949. Playing at a speed of 45 revolutions per minute, this type of record is often referred to as a “single” or, simply, a “45.” 45 RPM records became very popular in the 1950s and 1960s.

How do you play 45 records?

This plastic piece is the size of the hole in a 45 RPM record. Place the plastic piece over the turntable spindle. Also set the record speed button on the front left to 45 and the record size lever on the bottom right corner of the turntable to 7”. Then your turntable will be set to play 45 RPM records.

Do’t forget to share this post !

Was this helpful?

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top