The Canon T70 was a 35mm FD-mount single-lens reflex camera introduced in April 1984 as the second in Canon’s T series. The T70 started with the concepts explored in 1983’s T50, took them further, and applied them to a more sophisticated camera.
Thereof, Is Canon T70 good?
So, in the end, I kind of give up on my T70. It was a great camera, and even better as a companion camera – it’s lightweight, it has a great viewfinder and also a great metering system.
Accordingly, How do I turn off my Canon T70?
align its arrow with the red dot on the lens. Then lichily push it in and turn it clock- wise until it stops. 2] Turn the body cap counter- 2) Turn the body cap counter- clockwiso and pull it off.
How do I change the shutter speed on my Canon T70? With the lens at “A”, press the mode selector and the shift button until Tv appears on the display. Then select the required shutter speed using either of the shift buttons. The T70 automatically chooses the right f/stop.
Also know How do I put film in my Canon T70?
Solution
- To open the back cover push the back cover latch down while pressing the back cover latch safety lock button in.
- Place the film cartridge in the film chamber. A cartridge symbol will then appear on the display panel to indicate that film is loaded.
What batteries does a Canon T70 take? All powered camera functions drew on two AA batteries in the grip. A built-in lithium battery (BR-1225 or CR-1220) was used to store user settings; the batteries lasted for about five years, and had to be replaced by a technician, since replacing them required partial dismantling of the camera body.
How do I wind my Canon T70?
There is NO automatic rewind as on newer cameras. To rewind, slide the switch on the bottom of the T70 towards the silver rewind button, then press that button, too. The T70 will rewind the film, sounding like a toy while counting down the frame counter, and in 27 seconds, your 36-exposure roll is rewound.
How do you put film in a Canon T70?
Solution
- To open the back cover push the back cover latch down while pressing the back cover latch safety lock button in.
- Place the film cartridge in the film chamber. A cartridge symbol will then appear on the display panel to indicate that film is loaded.
How do I turn off my Canon t70?
align its arrow with the red dot on the lens. Then lichily push it in and turn it clock- wise until it stops. 2] Turn the body cap counter- 2) Turn the body cap counter- clockwiso and pull it off.
Don’t forget to share this post!