The general rule of thumb when setting a post is that the depth of the post’s hole needs to be one-third to one-half of the actual above-ground height of the post. So, a six-foot-high finished post ideally needs to be buried three feet into the ground.
Accordingly, How deep should I bury a 20 foot post?
In general, holes should be at least 3 feet deep for posts that extend 8 feet or more above ground level. Posts that extend 6 feet above ground level should have holes at least 2 1/2 feet deep.
as well, Can you put dry concrete in a post hole?
Should fence posts be set in concrete? Concrete provides a strong foundation for wooden fence posts, but can rot them more quickly. Setting them in dirt, with or without gravel or crushed rock depending on your soil type, can help the posts last longer before going rotten. You can also use metal fence post anchors to prolong their life.
So, How deep should a 6 foot fence post be? The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet). Add about 6 inches of QUIKRETE All-Purpose Gravel into the bottom of the hole. Then compact and level the gravel using a post or 2×4.
How far apart should fence post be?
Most fence posts can be spaced 8 to 12 feet apart. While this is a general criteria, it doesn’t cover all scenarios. For instance, high tensile fence can have larger spacing, requiring line posts every 15 to 20 feet for field fence styles, and as much as 20-30 feet for high tensile barbed and smooth wire.
How do I put a post in the ground without concrete?
Procedure:
- Find a concrete surface and lightly tamp your digging iron against it.
- Remove the turf and topsoil from the site of the post.
- Dig the hole putting the displaced earth onto the tarp.
- Pour 4 inches of gravel into the hole.
- Place the post in the hole.
- Add another 2 inches of gravel around the base of the post.
How far should a 6×6 post be in the ground?
The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet). Add about 6 inches of QUIKRETE All-Purpose Gravel into the bottom of the hole.
Is one bag of concrete enough for fence post?
1 – 4 bags of concrete per fence post are typically what’s needed. This depends on the type of soil, fence design, height, post size and bag weight. In general the depth of the post’s hole needs to be 1/3 to 1/2 of the above ground height of the post.
What happens if you dont water concrete?
Concrete that is not moist-cured at all dries too rapidly, and reaches less than half its potential design strength. It will also have a greater number of shrinkage cracks.
How long does 4 inches of concrete take to cure?
While it only takes around 28 days to cure concrete, drying can take months. The general rule of thumb is that concrete takes about 30 days to dry for every one inch of slab thickness.
Can you use pea gravel to set fence posts?
Setting wood or vinyl fence posts is a critical part of fence construction to make sure that the fence is sturdy. The use of pea gravel to help set posts provides good drainage and, when combined with concrete, results in a sturdy fence post installation.
How many bags of cement do I need for a fence post?
1 – 4 bags of concrete per fence post are typically what’s needed. This depends on the type of soil, fence design, height, post size and bag weight. In general the depth of the post’s hole needs to be 1/3 to 1/2 of the above ground height of the post.
How far apart do you set fence posts?
Most fence posts can be spaced 8 to 12 feet apart. While this is a general criteria, it doesn’t cover all scenarios. For instance, high tensile fence can have larger spacing, requiring line posts every 15 to 20 feet for field fence styles, and as much as 20-30 feet for high tensile barbed and smooth wire.
How many bags of concrete do you need for a fence post?
1 – 4 bags of concrete per fence post are typically what’s needed. This depends on the type of soil, fence design, height, post size and bag weight. In general the depth of the post’s hole needs to be 1/3 to 1/2 of the above ground height of the post.
How long does it take concrete to set in a post hole?
The concrete sets up in 20 to 40 minutes, so you can quickly move on to the next stage of the project (a great convenience when setting fence posts) or backfill the hole to finish the job. Under normal curing conditions, you can apply heavy weight to the post (a basketball backboard, for example) after just 4 hours.
Should fence posts be 6 or 8 feet apart?
Fence posts should be set six to eight feet apart on a 6 foot wood fence. Do not go beyond eight feet or the fence may not be stable enough.
How many fence posts do I need for 1 acre?
An acre is 43,560 square feet. If it were a perfect square it would be 208.71 feet on a side. Dividing that by 8 is 26.09 segments per side, or at least 104 full sections plus some fractions. But if the lot were 100 x 435.6 you would need 55 on each long side and 13 on each short side, for a total of 136 sections.
Can fence posts be 10 feet apart?
Typical spacing is right around 8 feet between each post however different circumstances may call for different measurements and it is not uncommon to have spacing between posts reach up to 10 feet. Once you have a rough idea of your post layout start by digging your first hole.
Can you pour concrete around treated post?
With pressure-treated posts, the rot will be slow. We have three ways to solve the rotten post problem. First, the posts should be set on top of a bed of coarse gravel 3 to 6 inches deep, so the base of the post is in contact with the gravel. Concrete should be poured around the post – no concrete under the post.
Do metal fence posts need concrete?
You can install a chain link fence without using concrete, but it is not recommended. Anchoring each fence post in concrete is the best way to ensure your fence will stand straight and tall for many years.
Should you cement fence posts?
No, fence posts don’t need to be set in concrete, and there are plenty of other ways to fix your posts if this feels a bit too permanent. If you are using wooden posts, concrete may actually be the worst option.
How many bags of concrete do I need for a 6×6 post hole?
How Much Concrete For A 6×6 Fence Post?
| Depth | 50 Lb Bags |
|---|---|
| 18″-21″ | 6 |
| 22″-25″ | 7 |
| 26″-28″ | 8 |
| 28″-30″ | 9 |
What is the best concrete mix for fence posts?
The best concrete mix for fence posts I’ve found is Quikrete Fast Setting Concrete Mix in a 50 lb bag. It’s 4000 psi, easy to work with, sets up fast, and doesn’t need to be mixed. Just pour it in the hole and soak with water.
How do you put a straight line in a fence post?
- Step 1: Clear the Fence Line. Remove any vegetation in the path of the fence.
- Step 2: Mark the Corners.
- Step 3: Make Batter Boards.
- Step 4: Align the First Batter Board.
- Step 5: Square the Corners.
- Step 6: Set Stakes to Mark Posts.
- Step 7: Align Posts with the String or Laser.