You do not need any wash aid or hypo clear unless you have a water shortage. A good wash is just fine for film and paper. And, you don’t have extra chemicals to dispose of.
Thereof, How do I use Kodak hypo clearing agent?
To prepare Kodak Hypo Clearing Agent stock, dissolve the contents in water. Stir until the powder has dissolved. Allow this to cool to room temperature, then the developer is then ready to use. Store in a tightly capped bottle until needed for use.
Accordingly, What is photo-Flo used for?
Kodak 1464510 Overview
This 16 oz bottle of Kodak Photo-Flo 200 Solution is a wetting agent used to minimize water marks or streaks during film development. It is used after the final wash when processing films to decrease the water-surface tension and promote faster, more uniform drying.
What does hypo do in photography? An emulsion of sodium thiosulfate (called hypo by photographers) is used to stop development of exposed film. Thiosulfate converts undeveloped silver bromide grains in the film into water-soluble silver thiosulfate complexes that can be removed when the film is washed.
Also know What is hypo clearing agent for?
Kodak Hypo Clearing promotes removal of fixer from films and fiber-base papers to shorten wash times and make washing at lower wash-water temperatures practical.
Can you reuse Kodak stop bath? Stop baths can be reused repeatedly until they lose their acidity. … Otherwise you can use litmus paper or simply replace the stop bath frequently enough that it is unlikely to exhaust. Stop baths are cheap enough, after all, especially if you make them up from dilute acetic acid as I do.
How long does Ilford Washaid last?
Ilford Washaid comes as a liquid concentrate meant to be mixed 1+4 (similar to the recommended stock solution of Kodak’s Hypo Clearing Agent). The storage life from Ilford: “ILFORD WASHAID concentrate will keep for:- 4 years in full airtight bottles – 6 months in half full tightly capped bottles.
How do you store photo-Flo?
I make up PhotoFlo at half the recommended concentration, using distilled water and store it in a plastic bottle. I use stainless reels and tanks and just place the reels/film in another stainless developing tank containing PhotFlo for 30 seconds (one-shot use).
What is photo-Flo made of?
Photo-flo contains ethylene glycol, better known as anti-freeze. The alternatives use some kind of detergent and sometimes glycerin.
What is fixer solution?
Photographic fixer is a mix of chemicals used in the final step in the photographic processing of film or paper. The fixer stabilises the image, removing the unexposed silver halide remaining on the photographic film or photographic paper, leaving behind the reduced metallic silver that forms the image.
What is the hypo solution?
Hypo Solution is the abbreviation for sodium thiosulphate or sodium hyposulphite. It is used for both film and photographic paper processing, the sodium thiosulfate is known as a photographic fixer and is often referred to as ‘hypo’, from the original chemical name, hyposulphite of soda.
How do you make a fixer solution?
To make 1 liter of non-hardening fixer mix the following:
- Water at 125F/52C – 800ml.
- Sodium Thiosulfate (hypo) – 240g.
- Sodium Sulfite – 30g.
How long does Kodak stop bath last?
It uses 2 other ingredients instead. Stop baths will keep just about forever even if the color vanishes from the indicator in some cases. You don’t need a wash after a stop even if you are using TF-4 for fixer, and espeicially if you are using an acid fix.
How often can you reuse fixer?
A single liter of Ilford Rapid Fixer or Eco-Pro Neutral fixer can be reused to fix up to 120 rolls of film. For the average film photographer, 6 months just isn’t enough time to get the full use out of a bottle.
Can I reuse developer?
Yes, as long as the developer isn’t one shot. The bottle/packaging should make reuse clear.
How do you dilute ILFORD RAPID FIXER?
To fix film, dilute Ilford Rapid Fixer 1+4. That means one part fix to four parts of water. For paper, you need to dilute it 1+9. So one part fixer to nine parts water.
How many times can you reuse fixer?
A single liter of Ilford Rapid Fixer or Eco-Pro Neutral fixer can be reused to fix up to 120 rolls of film. For the average film photographer, 6 months just isn’t enough time to get the full use out of a bottle.
What is chemical wetting?
wetting agent, also called surfactant, chemical substance that increases the spreading and penetrating properties of a liquid by lowering its surface tension—that is, the tendency of its molecules to adhere to each other.
What is photo wetting agent?
Wetting-agent is a very strong but pure detergent. Its purpose is to break the surface tension of the water and allow it to run off the surface of the film without hanging in drops. Drops of water hanging on the film will cause horseshoe-shaped water marks which cannot be removed.
How do you use Ilfotol?
You should use it as a final rinse before you hang your film up to dry. It will allow the film to dry in a more uniform fashion and thus prevent the marks. After development, stop, fix and wash, you simply leave your film in the wetting agent for about a minute.
Is Kodak Photo-Flo toxic?
Here’s the rub: Photo-Flo is poisonous when consumed… So, you’ll probably want to avoid using Smith’s famous recipe if there’s any chance of the fake blood getting into your model’s eyes or mouth. To make the fake blood less toxic, there are safer liquids you can use (e.g. creamer) as a substitute for Photo-Flo.
Do you need to squeegee film?
A film squeegee is used as an optional last step of the film developing routine before the film is hung to dry. After washing is complete and any final rinses like wetting agents or stabilizers have been used the film can be squeegeed. … Both the film and the squeegee should be perfectly clean.
Can you use photo-Flo on color negatives?
Photoflo is a super concentrated pure soap, safe to use on any negative. I use it with color, B&W and transparencies, never a problem.
Don’t forget to share this post!