This 16 oz bottle of Kodak Photo-Flo 200 Solution is a wetting agent used to minimize water marks or streaks during film development. It is used after the final wash when processing films to decrease the water-surface tension and promote faster, more uniform drying.
Thereof, Is Kodak Photo-Flo toxic?
Here’s the rub: Photo-Flo is poisonous when consumed… So, you’ll probably want to avoid using Smith’s famous recipe if there’s any chance of the fake blood getting into your model’s eyes or mouth. To make the fake blood less toxic, there are safer liquids you can use (e.g. creamer) as a substitute for Photo-Flo.
Accordingly, How long does Ilford Washaid last?
Ilford Washaid comes as a liquid concentrate meant to be mixed 1+4 (similar to the recommended stock solution of Kodak’s Hypo Clearing Agent). The storage life from Ilford: “ILFORD WASHAID concentrate will keep for:- 4 years in full airtight bottles – 6 months in half full tightly capped bottles.
Do you need to squeegee film? A film squeegee is used as an optional last step of the film developing routine before the film is hung to dry. After washing is complete and any final rinses like wetting agents or stabilizers have been used the film can be squeegeed. … Both the film and the squeegee should be perfectly clean.
Also know What does photo-Flo do to the film?
Kodak Photo-Flo 200 Solution is a wetting agent used to minimize water marks or streaks during film development. It is used after the final wash when processing films to decrease the water-surface tension and promote faster, more uniform drying.
Can you pour photo Flo down the drain? Pouring small quantities down the drain should not be a problem. Photo flow- using this causes water to drain off the film without leaving small droplets behind causing water spots.
How do you dilute ILFORD RAPID FIXER?
To fix film, dilute Ilford Rapid Fixer 1+4. That means one part fix to four parts of water. For paper, you need to dilute it 1+9. So one part fixer to nine parts water.
How many times can you reuse fixer?
A single liter of Ilford Rapid Fixer or Eco-Pro Neutral fixer can be reused to fix up to 120 rolls of film. For the average film photographer, 6 months just isn’t enough time to get the full use out of a bottle.
What can I use instead of a film squeegee?
Use PhotoFlo, Edwal LFN, or whatever wetting agent of your choice. It could even be a drop or two of dishwashing liquid in a quart of water – just enough so that the water doesn’t bead up on the film. Hang it to dry and that’s it.
How long does film take to dry?
Post Development. After development, let your film air-dry in a dust-free area for approximately 2 hours or so, until the film is completely dry. If any moisture is still present on the film’s surface, just be patient and wait for it to dry as opposed to trying to wipe it off.
How do you wipe a movie after developing it?
Run the shower in the bathroom till it’s steamed up then let it clear. This should give you a dust free enviroment. I rinse my film three times in distilled water. Hang the film up to dry (I cut it into strips of 18 for 35mm).
Do you need Hypoclear?
You do not need any wash aid or hypo clear unless you have a water shortage. A good wash is just fine for film and paper. And, you don’t have extra chemicals to dispose of.
What is hypo clearing agent?
Kodak Hypo Clearing Agent can be used to shorten wash times for films and prints. It will break down the chemicals left over from the fixer and help to drastically reduce wash times. … It is particularly useful for speeding up the washing of fibre based papers, which usually require much longer wash times.
What is chemical wetting?
wetting agent, also called surfactant, chemical substance that increases the spreading and penetrating properties of a liquid by lowering its surface tension—that is, the tendency of its molecules to adhere to each other.
Is Hypoclear necessary?
You do not need any wash aid or hypo clear unless you have a water shortage. A good wash is just fine for film and paper. And, you don’t have extra chemicals to dispose of.
Can you reuse Kodak stop bath?
Stop baths can be reused repeatedly until they lose their acidity. … Otherwise you can use litmus paper or simply replace the stop bath frequently enough that it is unlikely to exhaust. Stop baths are cheap enough, after all, especially if you make them up from dilute acetic acid as I do.
What does Hypo clear mean in photography?
After materials have been fixed, washing removes unwanted and exhausted processing chemicals which, if left in situ, may cause deterioration and destruction of the image. … Washing aids (also called hypo clearing agents) can be used to make the process of removing fixer faster and more thorough.
What is a 1/4 dilution?
TL;DR (Too Long; Didn’t Read) A 1:4 dilution ratio means that a simple dilution contains one part concentrated solution or solute and four parts of the solvent, which is usually water. For example, frozen juice that requires one can of frozen juice plus four cans of water is a 1:4 simple dilution.
What is photo wetting agent?
Wetting-agent is a very strong but pure detergent. Its purpose is to break the surface tension of the water and allow it to run off the surface of the film without hanging in drops. Drops of water hanging on the film will cause horseshoe-shaped water marks which cannot be removed.
How do you mix Ilford stop bath?
To prepare your stop bath, dilute Ilford Ilfostop 1+19. That means one part Ilfostop to nineteen parts water. The dilution is the same for both paper and film processing. Make sure you mix together thoroughly before use.
Can I reuse developer?
Yes, as long as the developer isn’t one shot. The bottle/packaging should make reuse clear.
Can you reuse fixer photography?
Yes, you can reuse fixer. And you can use it for several days, as long as it remains clear and does not accumulate suspended crud.
How can I dry my film?
Place one or two old bath towels or absorbent mat on the floor below the drying rack to catch the dripping water or chemicals as to not ruin the floor. After processing film, place one end on an alligator clip attached to the dowel and hang a loose clip at the bottom of the film strip. Let it hang and drip dry.
How can I make a movie dry faster?
My usual procedure is to hang film and squirt distilled water down the length of the film on both sides using a squeeze bottle. The fastest dry time is about 2 hours. If I need faster dry time I run a small fan on low to circulate air around the film. This will decrease dry time to 30 minutes or less.
Don’t forget to share this post!