Standard / Metric Wrench Conversion Chart
| Bolt Diameter | Standard | Metric |
|---|---|---|
| 7/16″ | 5/8″ |
16mm |
| 1/2″ | 3/4″ | 19mm |
| 9/16″ | 13/16″ | 21mm |
| 7/8″ | 22mm |
•
26 août 2019
Thereof, What is a 22mm socket in standard?
Metric / Standard Wrench Conversion Chart
| Bolt Diameter | Metric | Standard |
|---|---|---|
| 22mm |
7/8″ |
|
| 5/8″ | 24mm | 15/16″ |
| 25mm | 1″ | |
| 3/4″ | 29mm | 1-1/8″ |
•
9 avr. 2020
Accordingly, What is a 28mm in standard?
Size Conversion Chart
| Gauge | Inches | Millimeters |
|---|---|---|
| – | 7/8″ | 22mm |
| – | 1″ | 25mm |
| – |
1-1/8″ |
28mm |
| – | 1-1/4″ | 32mm |
Is 7/8 the same as 22mm? 21mm = just over 13/16 inch. 22mm = almost 7/8 inch. 23mm = 29/32 inch. 24mm = just over 15/16 inch.
Also know What is 27mm in standard?
Wrench Size And Conversion Table
| Inches | Millimeters | Spanner |
|---|---|---|
| 1.063 | 27mm |
1 1/16 AF ; 27mm |
| 1.100 | 5/16 Wworth; 11/16 BSF | |
| 1.125 | 1 1/8 AF | |
| 1.181 | 30mm | 30mm |
What fraction is 22mm?
| Decimal | Fraction | Metric |
|---|---|---|
| 0.1575 | 19.05 mm | |
| 0.1875 | 3/16 | 20 mm |
| 0.1969 | 21 mm | |
| 0.2188 |
7/32 |
22 mm |
What are the standard socket sizes in order?
There are four common socket sizes: 1/4 inch (0.6 centimeters), 3/8 inch (0.9 centimeters), 1/2 inch (1.3 centimeters) and 3/4 inch (1.9 centimeters). In-between sizes are available too, starting with 1/4 inch (0.6 centimeters) and increasing every sixteenth of an inch (0.16 centimeters).
What size is 27mm in standard?
Wrench Size And Conversion Table
| Inches | Millimeters | Spanner |
|---|---|---|
| 1.063 | 27mm |
1 1/16 AF ; 27mm |
| 1.100 | 5/16 Wworth; 11/16 BSF | |
| 1.125 | 1 1/8 AF | |
| 1.181 | 30mm | 30mm |
Can you use metric sockets on standard bolts?
While car and truck maintenance seems to lead the way on the transition from SAE to metric measurement standards for fasteners, and therefore the sockets used to tighten and loosen them, these same standards are used on virtually all bolt fasteners commonly distributed throughout the world.
What size is 22mm?
| MM | Approximate Size In Inches | Exact Size In Inches |
|---|---|---|
| 22mm |
Just short of 7/8 Inch |
0.86614 Inches |
| 23mm | Little over 7/8 Inch | 0.90551 Inches |
| 24mm | 15/16 Inch | 0.94488 Inches |
| 25mm | 1 Inch | 0.98425 Inches |
Will a 7/8 socket work on 22mm?
7/8″ is 0.875″ and 22mm is 0.866142″ which means the 22mm would give a slightly tighter fit and thus be less likely to strip.
What’s a 20 mm in standard?
SAE to Metric Conversion Chart
| SAE | Metric | Inch |
|---|---|---|
| 20mm |
0.787 |
|
| 13/16″ | 0.813 | |
| 21mm | 0.827 | |
| 27/32″ | 0.844 |
•
29 avr. 2020
What is a 20mm socket in standard?
20mm. Just short of 13/16 Inch.
What size is 30mm in inches?
Millimeters to inches conversion table
| Millimeters (mm) | Inches (“) (decimal) | Inches (“) (fraction) |
|---|---|---|
| 30 mm |
1.1811 ″ |
1 3/16 ″ |
| 40 mm | 1.5784 ″ | 1 37/64 ″ |
| 50 mm | 1.9685 ″ | 1 31/32 ″ |
| 60 mm | 2.3622 ″ | 2 23/64 ″ |
What is the socket size?
Metric Socket Sizes Chart
| 3/8″ Drive | 1/4″ Drive | 1/2″ Drive |
|---|---|---|
| 13mm | 10mm | 16mm |
| 14mm | 11mm | 17mm |
| 15mm |
12mm |
18mm |
| 16mm | 13mm | 19mm |
•
17 avr. 2021
What fraction is 28mm?
Millimeters to inches conversion table
| Millimeters (mm) | Inches (“) (decimal) | Inches (“) (fraction) |
|---|---|---|
| 10 mm | 0.3937 ″ | 25/64 ″ |
| 20 mm | 0.7874 ″ | 25/32 ″ |
| 30 mm | 1.1811 ″ | 1 3/16 ″ |
| 40 mm | 1.5784 ″ | 1 37/64 ″ |
What size is 20mm in inches?
| MM | Approximate Size In Inches | Exact Size In Inches |
|---|---|---|
| 20mm |
Just short of 13/16 Inch |
0.78740 Inches |
| 21mm | Little over 13/16 Inch | 0.82677 Inches |
| 22mm | Just short of 7/8 Inch | 0.86614 Inches |
| 23mm | Little over 7/8 Inch | 0.90551 Inches |
How do you turn 0.315 into a fraction?
Steps to convert decimal into fraction
- Write 0.315 as 0.3151.
- 0.315 × 10001 × 1000 = 3151000.
- 63200.
What size socket fits a 22mm nut?
Size Chart
| Bolt size | Size | Tolerance |
|---|---|---|
| 7/16″BSW | 21.29 | |
| 21mm | 21.46 | |
|
M14 |
22mm | 22.46 |
| 1/2″UNC | 7/8″ | 22.68 |
How do I know what size socket I need?
How to Determine the Right Size Socket for a Nut
- Turn on the digital caliper and set it to read in inches, not millimeters. …
- Close the caliper jaws until each jaw rests on one flat side of the nut on opposite sides.
- Check the caliper display. …
- Turn on the digital caliper and set it to read in millimeters, not inches.
How do you read socket sizes?
Socket set sizes
- The size of the drive socket (the part that attaches to the socket wrench). These are always given in imperial measurements, and will usually be either 1/4″, 3/8″, 1/2″, 3/4″ or 1″.
- The size of the socket head (the part that fits over or into a fastener).
Will a 1.4 socket fit a 32mm nut?
FYI: 32mm and 1 1/4 wrench are the same.
How do you tell if a bolt is SAE or metric?
Metric and SAE fasteners are measured differently and with different vocabulary. SAE nuts, bolts and screws are measured by their thread count, or TPI (threads per inch) and their length. Metric fasteners are measured by length and pitch, or the distance between threads.
Which is more common SAE or metric?
Whereas SAE is quite common in the United States, metric is the most common measurement type throughout the rest of the world. Though there are various reasons for this, it tends to be more accurate than using fractional increments on an inch.
Is Ford SAE or metric?
With a few exceptions of really old carryover parts (like the 8.8 rear axle in a Crown Vic), Fords and all manufacturers are metric and have been for quite some time.
Don’t forget to share this post!