Can I use Windex to clean my vinyl records?

You can now proceed to use Windex. Remember, as it’s harsher than just water and soap, so only spray a little on the records. A few sprays will do as you’re going to spread the solution by using your microfiber cloth anyway. Wipe the records gently until the Windex dries up and polishes the records.

Also Can I use alcohol to clean vinyl records? Cleaning your vinyl records with pure alcohol is not safe and you should never use undiluted alcohol to clean them. Some commercially available record cleaning solutions do contain a small concentration of isopropyl alcohol, but this is mixed with other ingredients.

Likewise Can you use vinegar to clean vinyl records? Sum everything up, the best way to clean the record is cleaning vinyl records with vinegar. … It is very good for cleaning. I use white vinegar and distilled water 50-50 for many years, it gives an excellent result. I highly recommend this to all vinyl lovers.

Is vinegar safe on vinyl? Vinegar can clean vinyl floors, laminate countertops, and ceramic sinks and toilets—but it can’t clean everything. Avoid using vinegar as a cleaning agent on these five places in the household, as there are other solutions that are either less risky or more effective.

Can you clean vinyl records with glass cleaner?

Technically you can use glass cleaner or Windex on your vinyl records but it is debatable whether or not you should. A lot of vinyl users that have been around the block for a long time say that this is the only method they have used consistently.

Can you clean vinyl records with vinegar? Sum everything up, the best way to clean the record is cleaning vinyl records with vinegar. … It is very good for cleaning. I use white vinegar and distilled water 50-50 for many years, it gives an excellent result. I highly recommend this to all vinyl lovers.

Can you use glasses cleaner on records? By all means laugh and deride but I have found Spectacle Lens cleaner (Specsavers Lens Bright) does an excellent job of wetting the disc surface and removing any trace of surface dirt. Judging from the playing after it also digs into those grooves too.

How can I restore my vinyl records? Repairing a Scratched Record

  1. Gently wash your vinyl with water to remove any obvious debris.
  2. Grab a piece of 1500 grit sandpaper and wet it. …
  3. Wet your vinyl as well and place it on a hard, flat surface.
  4. Lightly sand each side of the vinyl where there are scratches.

Can you clean records with soap and water?

Absolutely you can clean vinyl records with water. … It would also help to rinse or use a standard record brush with a solution on the groove surface prior to cleaning with soapy water in order to remove the larger dirt, dust, and other contaminants on the surface that could scratch during the cleaning process.

Is it OK to clean vinyl records with water? Ideally, you want to use distilled water to avoid impurities from your tap getting into the grooves of the record. Try to avoid the label when cleaning with water. … The brush helps remove dirt and impurities from the grooves of the record when you move it in a concentric motion, or along the same axis as the record.

Can you use wd40 on vinyl records?

WD-40 is a great vinyl record cleaning product. It does not contain any ammonia or alcohol, and it is a volatile solvent. After use, it will remove the dirt or dust, evaporate and leave behind a non-volatile lubricant. … All you require is a lint-free cloth, the WD-40, and time.

Can you use Murphy’s Oil soap on vinyl? Can I use Murphy’s Oil Soap on luxury vinyl floors? Yes-Murphy Oil is a great choice for vinyl floor cleaning since it’s clear and 98% derived from natural ingredients.

Can you use Dawn to clean vinyl siding?

Dish soap or laundry soap mixed with warm water are efficient at cleaning your siding. … You can use a handheld spray bottle to apply your dish soap mixture. Using a wet soft-bristled brush, start from the bottom of your section and scrub from side to side.

Can we use apple cider vinegar for cleaning?

Apple cider vinegar is often a popular choice for a natural alternative to commercial cleaning agents. This is because of its antibacterial properties. Mix 1 cup of water with half a cup of apple cider vinegar, and you’ll have a natural all-purpose cleaner.

How do you clean vinyl records with soap and water?

How do you clean vinyl records after a flood?

  1. Take the records out of the paper jacket and lay the record flat on a towel so it can dry. …
  2. Use a soft cotton towel and distilled water to wipe the record.
  3. DO NOT use any household cleaning products such as rubbing alcohol or Windex because they will break down the vinyl.

How do you restore a vinyl record?

Repairing a Scratched Record

  1. Gently wash your vinyl with water to remove any obvious debris.
  2. Grab a piece of 1500 grit sandpaper and wet it. …
  3. Wet your vinyl as well and place it on a hard, flat surface.
  4. Lightly sand each side of the vinyl where there are scratches.

Will vinegar damage vinyl records? It contains only acetic acid (about 5%) and water, with no additions that can be harmful to vinyl records. Dilute it with distilled water in the proportion of 50 / 50. Apply vinegar on the microfiber cloth, not on the disk surface. Wipe it with the cloth thoroughly.

How do you clean a water damaged vinyl record?

Use distilled water with a very small amount of liquid dish soap. Be sure you remove any larger contaminants from the record either with a record brush and cleaning solution or rinse with water. This should take off most if not all mold.

Why is my record so crackly? A dirty record is one of the most common reasons for crackle. Dust and dirt lodged in the record grooves act as an obstacle for your turntable’s stylus, and when the stylus hits one of these microscopic particles it will jump and create that popping sound associated with crackle.

How do you clean records with water?

Can you fix scratches on vinyl records? Apply a thin line of epoxy or wood glue to the scratched area. Use a toothpick to ease into the crack and allow time for it to seep in thoroughly. If there are multiple scratches, apply glue to the entire record as it spins on your turntable.

Do’t forget to share this post !

Was this helpful?

Leave a Comment

Your email address will not be published. Required fields are marked *