How do I connect my Epson printer to the WIFI?


Here’s how:

  1. Turn your Epson printer on.
  2. Press the Home button on the printer’s control panel.
  3. Use the arrow button to select Wi-Fi Setup. …
  4. Press OK until you see the selection. …
  5. After it’s searching, choose the network name on the screen.
  6. Enter your network password.
  7. Wait for this screen then press OK.

Thereof, Can I connect a wireless printer with a USB cable?

Yes, you can connect the printer to a computer with a USB cable and a wireless network. … Since the default setting is on for the automatic interface selection mode, simply connect the USB cable to the printer. Always turn off both your computer and printer when connecting or disconnecting the cable.

Accordingly, How do I connect my Epson printer to WiFi without WPS?

How to connect your printer to your router without WPS? Press and hold together the WiFi+Info buttons to enable “Wi-Fi Direct” mode (Simple AccessPoint), or see in your manual how to enable Direct mode (printer as AP) and do it Hold Info button for about 7 seconds to print informatin/status page.

Why wont my Epson wireless printer connect? The Epson printer not connecting to the Wi-Fi problem usually occurs if you are using an outdated printer driver. Feel free to try correcting this annoying problem by simply using a software update utility. Additionally, check if the issue is triggered due to your Internet connection by verifying the network settings.

Also know Can I setup my wireless printer without a USB cable?

You don’t need to go hunting for a USB cable to connect to a printer, and you don’t need a printer for every PC. Set up the printer to connect to your existing Wi-Fi network, and as long as you are on the same network, you will be able to print. …

Do I need an Ethernet cable for wireless printer? Most wireless routers provide physical connection points for wired network devices such as computers and printers. A special cable called an Ethernet cable is used. … For example, a desktop computer connected by Ethernet can print to a wireless printer as long as they are connected to the same wireless router.

Can I connect my wireless printer directly to my computer?

Your printer should have been packaged with a USB cable regardless of whether it is a wireless or wired printer. Plug the cable into your printer and your computer’s USB port. The direct linking should trigger your computer to recognize the printer and start up the software needed to complete the installation.

How do I connect my Epson L355 to WIFI without CD?


Epson L355 Wi-Fi Setup for Windows

  1. Switch on the Epson L355 printer. …
  2. Navigate to the Network Settings option. …
  3. You have to browse the option named Wireless Setup on the window of Network Settings.
  4. Go to the menu named the Advanced Setup. …
  5. Choose the Manual Setup option.

How do I connect my wireless Epson printer to my phone?

On your Android device, download the Epson Print Enabler plug-in from Google Play. Go to Settings on your Android device, select Printing, and enable the Epson plug-in. Connect your Android device to the same wireless network as your product. Now you are ready to print.

How do I get my printer to recognize my WiFi?


How to Fix the Problem

  1. Try connecting to the printer with a cable. This allows you to see whether the WiFi signal is the issue. …
  2. Find a new spot for the printer. …
  3. Check the printer queue. …
  4. Reboot the printer. …
  5. Make sure the firmware is up-to-date. …
  6. Confirm that your mobile device is on the right network. …
  7. Reset the printer.

Why is my printer not finding my WiFi?

Make sure the printer is on or that it has power. Connect your printer to your computer or other device. Check the printer’s toner and paper, plus the printer queue. … In this case, reconnect your device to the network, reconfigure security settings to include printers, and/or install updated drivers.

What is a WPS WiFi?

Wi-Fi® Protected Setup (WPS) is a built-in feature of many routers that make it easier to connect Wi-Fi enabled devices to a secure wireless network. …

Does a wireless printer have to be plugged into the router?

Wireless. As the name implies, a wireless printer doesn’t need to be plugged into anything other than a power source to operate properly. Communication between the printer and the computer or network is established through either a Bluetooth or Wi-Fi connection.

Does a wireless printer need to be connected to the router?

Most modern models have wi-fi built-in, but if yours doesn’t, there are still ways of making it work wirelessly by connecting it to a router. But before you can start printing, you must first connect the printer to your home network – all you’ll need is a wireless router and a wi-fi printer.

Can I setup a wireless printer without a computer?

Most modern printers have Wi-Fi capability, allowing you to set them up without connecting to any of your computers. The printer will need to be in range of your wireless router in order to connect to it.

What is the difference between a wireless printer and a Wi-Fi printer?

Your wireless printer may be able to connect to devices like a cell phone without being connected to a Wi-Fi network, depending on its settings. Wi-Fi printers need to be linked to whatever computer is sending the print job on the same Wi-Fi network.

How do I connect my Epson printer to my laptop?


Epson Connect Printer Setup For Windows

  1. Download and install the Epson Connect Printer Setup Utility.
  2. Agree to the End-User License Agreement, then click Next.
  3. Click Install, then Finish.
  4. Select your product, then click Next.
  5. Select Printer Registration, then click Next.
  6. Select Agree, then click Next.

How do I connect my printer to my computer wirelessly?


To install or add a network, wireless, or Bluetooth printer

  1. Select the Start button, then select Settings > Devices > Printers & scanners. Open Printers & scanners settings.
  2. Select Add a printer or scanner. Wait for it to find nearby printers, then choose the one you want to use, and select Add device.

Is Epson L355 wireless?

The Epson L355 is a wireless all-in-one with integrated ink system, ideal for home offices and small offices. This printer, scanner and copier features Wi-Fi connectivity and two extra bottles of black ink. … In addition, Epson iPrint*3 allows you to print wirelessly from smartphones and tablet PCs within the office.

How do I change the wifi on my Epson L355?

On the Select Settings screen, select Printer and computer settings, and then click Next. The current setting appears. Click Change Settings. Select the connection method that you want to change.

What is Epson Navi?

TM-C3500 Install Navi is the utility used to install/introduce this printer for a host computer. The user can set up the host computer and this printer using a wizard format. Included in the supplied CD-ROM. Epson highly recommends to use Install Navi for the printer setup.

How do I print from my phone to a wireless printer?

Start your mobile application and tap the Settings icon. (Mobile Cable Label Tool users must also tap [Printer Settings] – [Printer].) Select the printer listed under [Wi-Fi Printer]. You can now print from your device wirelessly.

Does Epson printer have Bluetooth?

To send and print photos wirelessly from Bluetooth-enabled devices, such as digital still cameras, digital video cameras, PDAs, mobile phones, and computers, you can use the optional Bluetooth Photo Print Adapter, available from Epson.

How do I get my iPhone to recognize a printer?

Open Settings and tap Bluetooth. Look for your printer in the list called My Devices and tap the information button (the blue i) to its right. Finally, tap Forget This Device to forget your printer on your iPhone. Go back to Settings -> Bluetooth to begin reconnecting your iPhone to your printer.

Don’t forget to share this post!

Was this helpful?

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top