Why is my iPhone 7 stuck on the startup screen?

If this is the first time your iPhone gets stuck on the Apple logo, and then try to do a force restart. Performing a force restart is highly recommended for iPhones that are not responding to touch. To do so, press and hold the Sleep/Wake and Volume Down buttons for at least 10 seconds until the Apple logo appears.

Thereof, How do I get my iPhone 7 out of DFU mode?

Exiting DFU Mode

To exit DFU Mode, simply force restart your device. For iPad, iPhone 6s and below, iPhone SE and iPod touch: hold the Home button and the Lock button until the device reboots. For iPhone 7 and iPhone 7 Plus: hold down the Side button and Volume Down button until the device reboots.

Accordingly, How do you fix an unresponsive iPhone screen?

Try restarting it normally by simultaneously holding the Side button and Volume Up/Down button on the iPhone X and later models (hold only the Side/Top button on the iPhone SE (2020)/iPhone 8 and earlier models). If your touchscreen is still responsive enough to swipe the Slide to Power Off slider, swipe it.

How do I hard reset my iPhone 7?
How to Force Restart (Hard Reset) iPhone 7

  1. Hold down the Volume Down button on the left side of the device and the Sleep/Wake button on the right side of the device at the same time.
  2. Now, hold the buttons for approximately 10 seconds until the screen goes dark and an Apple logo appears on the screen.

Also know How do I fix my iPhone stuck in DFU mode?


To get out of DFU mode follow

  1. Hold down the Sleep button and Home button at the same time.
  2. After a few seconds the Apple logo appears and the iPhone will boot.
  3. Your iPhone is now out of DFU mode.

What is DFU mode iPhone 7? DFU mode on iPhone 7 and iPhone 7 Plus. Recovery mode is the state your iPhone 7 goes into when updating your phone to the latest firmware. iTunes remembers your current settings and your personal data and restores it to your iPhone 7 once the firmware is updated.

How do I factory reset my iPhone 7 without iTunes?


Reset iPhone 7/7 Plus to factory settings without iTunes

  1. Open your iPhone, go to “Settings,” tap “General.”
  2. Scroll to the bottom and click “Reset,” then tap “Erase all Content and Settings.”

What causes an iPhone screen to go blank?

A black screen is usually caused by a hardware problem with your iPhone, so there usually isn’t a quick fix. That being said, a software crash can cause your iPhone display to freeze and turn black, so let’s try a hard reset to see if that’s what’s going on.

How do you unfreeze an iPhone?

An immediate way to unfreeze your iPhone is by performing the hard reset. Hold the “sleep/wake” button on your iPhone and the “Home” button simultaneously for 10 seconds until an Apple logo appears on the screen. The iPhone will restart back to normalcy.

How do I fix an unresponsive touch screen?

Press and hold the power button and volume UP button (some phones use power button volume Down button) at the same time; Afterwards, release the buttons after an Android icon appears on the screen; Use the volume buttons to choose “wipe data/factory reset” and press the power button to confirm.

How do you restart a frozen iPhone 7?

Press and quickly release the volume down button. Then press and hold the side button. On your iPhone 7 or iPhone 7 Plus: Press and hold the side button and volume down button at the same time.

How do you force restart an iPhone?

Press and hold either volume button and the side button until the power off slider appears. Drag the slider, then wait 30 seconds for your device to turn off. If your device is frozen or unresponsive, force-restart your device.

How do I get my iPhone 8 out of DFU mode?

To exit out of DFU mode, press and release the Volume Up button, press and release the Volume Down button, and press and hold the Side button until you see the Apple logo appear on screen (You can also use this for exiting recovery-mode if you just prefer to remember a single method).

How do I get my iPhone out of DFU mode without a computer?

For iPhone 6s and later, and iPod touch: Press the Home button and the Power/ Sleep button at the same time for like 10s until the device reboots. Step 3. Tap the Power button immediately and wait until your iOS device restart. After that, your iOS device will exit DFU mode and be in a normal state.

How do I put my iPhone 7 into safe mode?


How to enter Safe Mode

  1. To activate Safe Mode, hold the power key until the Power off icon appears.
  2. Press and hold the Power off icon until the Safe Mode prompt appears.
  3. Select Safe Mode to confirm.

How do I do a soft reset on my iPhone 7?

Apple has changed the soft reset instructions for the iPhone 7 and iPhone 7 Plus. To do a soft reset, just hold down the power button and the lower volume button for approximately 10 seconds until the Apple logo appears on the screen. The iPhone will then reboot and be ready for use.

How do I reset my iPhone 7 without a computer?


Part 1.


Factory Reset an iPhone Without a Computer via Settings

  1. Go to the Settings app > General > Reset > Erase All Content and Settings. …
  2. The process will take a couple of minutes to complete. …
  3. Open Safari or any browsers on any of your device > Enter icloud.com > Log in with your Apple ID and password.

How do you fix a frozen iPhone 7 without iTunes?

Press and hold down the Sleep/Wake and Home buttons simultaneously until the Apple logo appears. Once you see the logo, let go of the buttons. Once your iPhone reboots itself, you’re done with this process.

Why won’t my iPhone 7 Let me do a hard reset?

If your power button or volume down button is broken, you may not be able to perform a hard reset on your iPhone 7 or 7 Plus. If your iPhone is still under warranty, the Apple Store may cover the cost of the repair for you. Go to Apple’s support page to set up an appointment at your local Apple Store.

How do I fix the black screen of death on my iPhone 7?

Here’s how: To force restart your iPhone 7 Plus, simply press and hold the Power and Volume Down buttons simultaneously for about 10 to 20 seconds and then release both buttons when the Apple logo appears. Wait until your device power cycles and perform normally again.

Why won’t my iPhone 7 turn on after it died?

My iPhone 7 Won’t Turn On

The quick fix: This could be a simple system crash. Perform an iPhone 7 soft reset even if the phone seems dead. To do this press and hold BOTH the power (sleep/wake) button and the volume down button at the same time for 10-15 seconds. If the logo appears – your forced restart did the trick.

Why is my screen black but my phone is on?

Plug in phone, wait five minutes, and then try to do a Force Restart. This ensure the phone has enough power to restart, and restarting could clear any errors that might be affecting the screen. If possible, remove the battery, wait 30 seconds or more, and then reinstall the battery and start your phone.

How do I unfreeze my iPhone 7?

Press and quickly release the volume down button. Then press and hold the side button. On your iPhone 7 or iPhone 7 Plus: Press and hold the side button and volume down button at the same time.

What happens when a hard reset doesn’t work on iPhone?

Try and Force Restart your iPhone EXACTLY as shown below and see whether that resolves the issue: Press and quickly release Volume UP button. Press and quickly release Volume DOWN button. Press and Hold the SIDE button until an Apple logo appears and then release the Side button (Can take up to 20 seconds.

What do you do when your iPhone won’t force restart?


Try to Force Restart iPhone

  1. Quickly press and release the Volume Up button.
  2. And press and release the Volume Down button.
  3. Then press and hold the Side button. Release the Side button when the Apple logo appears.

Don’t forget to share this post!

Was this helpful?

Leave a Comment

Your email address will not be published. Required fields are marked *