Is 45 higher quality than 33?

Since 45s travel faster than 33s, more waveform definition can be squeezed into the format, which takes up more room. More bumps and grooves created in pressing a 45 means better audio quality. … Again, it is similar to MP3 sound quality issues in the digital world.

Also What happens if you play a 45 record at 33? The tip mass of the stylus will probably erase the highest frequencies from the record if you play it back at 45 instead of 33. The tip mass of the stylus will probably erase the highest frequencies from the record if you play it back at 45 instead of 33.

Likewise Are albums 33 or 45? Generally speaking, all of the records that you would see down in a local record store (or a Barnes and Noble) are 33 RPM, 12-inch releases. … Single discs are physically smaller u2013 usually 7 inch 45 RPM releases. If you purchased the full length, 12-inch album, you have an LP.

Why do records play at 33 rpm? rpm spread across the oceans in the late 1940s as people wanted longer playing time than 78 rpm records could offer. In the 33 ? rpm records, the grooves were 2 thousandth of an inch and the smaller radius of the newly introduced cartridges allowed a full frequency recording at 33 rpm.

Why do 45s have a bigger hole?

RCA decided to make the hole on its new 45 1.5 inches wide for a couple of reasons. First, RCA wanted its new format to crush the LPs being issued by Columbia and its licensed partners. Someone in the company came up with the idea of making and selling turntables designed exclusively for 45s.

Why do 45 records spin faster? The Quest For Better Sound and Improved Playing Time

The slower a record turns, the worse the audio sounds. Due to this, in order to provide the best sound possible, the record needs to turn faster (higher RPM). … This is because more information pressed into the vinyl is read in the same period of time.

Are all 12-inch records 33 RPM? 12 inch records are generally manufactured for full-length (LP) albums. … 33 rpm is the most common speed for 12 inch records. Over 22 minutes per side is possible, but may require further adjustments to EQ and/or levels for it all to fit nicely and sound great.

Can you play a 45 on a record player? In order to play a 45 RPM record that has a 1.5-inch hole, you must use an adapter that has an outside diameter of 1.5 inches and a 0.25-inch hole in the center. … Please note that a 45 RPM record with a 0.25-inch hole does not need an adapter and should be placed over the turntable’s spindle-like a 33-1/3 RPM record.

What goes in the middle of a 45 record?

A 45 rpm adapter (also 45 rpm record insert, 45 rpm spindle adapter, 7-inch adapter or spider, the common size of 45 RPM records) is a small plastic or metal insert that goes in the middle of a 45-rpm record so it can be played on the standard size spindle of a turntable.

Why are singles 45 rpm? In order to make the disc smaller than the 10-inch, 78-rpm discs used since the 1890s, they reduced the speed to 45-rpm and used a much finer groove. This meant that they could pack in more grooves in a smaller space.

Can record players play 45?

The answer here is yes, some turntables are able to play all records sizes. Most turntables in today’s market are able to play 33 RPM and 45 RPM records. A smaller percentage of turntables also have the possibility to play 78 RPM records.

Can you play a 7-inch vinyl on any record player? All record players do not play every single size of vinyl record. All record players will play the two most common sizes of vinyl record, those being 12-inch and 7-inch, but it is far less likely they will be able to play a 10-inch record.

What is the value of old 33 rpm records?

Rare and Valuable LPs (33 RPM)

Some sell for $1000 or more. “Most collected artists” records have the highest values. Most “Fans” LPs made after 1970 sell for $10 or more and some made before 1970 sell for $100+. See Fans below for more details.

When did 45s replace 78s?

The names are derived from its play speed, 45 rpm (revolutions per minute), and the standard diameter, 7 inches. The 7-inch 45 rpm record was released 31 March 1949, by RCA Victor as a smaller, more durable and higher-fidelity replacement for the 78 rpm shellac discs.

What size record is a 45? Competing formats. The LP was soon confronted by the “45”, a 7-inch (180 mm) diameter fine-grooved vinyl record playing at 45 rpm, introduced by RCA Victor in 1949. To compete with the LP, boxed album sets of 45s were issued, along with EP (extended play) 45s, which squeezed two or even three selections onto each side.

Do they still make 45 rpm records? Vinyl records are still in production today and the market is growing rapidly. Multiple different sizes of vinyl records are still being produced including 7”, 10”, and 12”. The main speeds of vinyl records that are still being produced today are 45 rpm and 33⅓ rpm.

How much are Beatles 45s worth?

That record is probably worth about 2,500 dollars.

What do you call the thing you put in the middle of a 45 record? A 45 rpm adapter (also 45 rpm record insert, 45 rpm spindle adapter, 7-inch adapter or spider, the common size of 45 RPM records) is a small plastic or metal insert that goes in the middle of a 45-rpm record so it can be played on the standard size spindle of a turntable.

Can Victrola play 45s?

What kinds of records can I play on my Victor or Victrola? ANSWER: Victors and Victrolas will play any laterally-cut 78 RPM record. … And you CAN’T play vinyl LP’s or 45 RPM discs!!

Why are 7-inch records 45 rpm? 7-inch format

The names are derived from its play speed, 45 rpm (revolutions per minute), and the standard diameter, 7 inches. The 7-inch 45 rpm record was released 31 March 1949, by RCA Victor as a smaller, more durable and higher-fidelity replacement for the 78 rpm shellac discs.

What are 45 vinyl records worth?

Rock and roll and R&B 45s with the cardboard sleeves are worth at least $20, with many being worth more than $200. First pressings of albums have more value than second, third, or subsequent pressings. They are referred to as the “originals” that were purchased when the record first hit the charts.

When did they stop making 45 rpm records? In the 1990s, most record labels discontinued production of the 45 RPM vinyl record. As a result, the 45 quickly become a collectors item. Later, when a resurrection of interest in 45 RPM records began, many artists, especially those whose work had been largely unnoticed (“unsung”), became new marketing phenomena.

Are 45 records still being made?

Are vinyl records still made? Vinyl records are still in production today and the market is growing rapidly. Multiple different sizes of vinyl records are still being produced including 7”, 10”, and 12”. The main speeds of vinyl records that are still being produced today are 45 rpm and 33⅓ rpm.

What speed are most records? Vinyl is pressed in one of 3 speeds: 33 1/3 Rotations Per Minute (RPM), 45 RPM, and 78 RPMs. The majority of 12-inch long play (LPs) are 33 1/3 RPMs, and most 7-inch extended play (EPs) or singles are 45 RPMs. However, 10-inch discs are common at both speeds and there are exceptions (e.g. 12-inch 45 RPM discs).

Do older record players sound better?

The only reason to suggest that an older turntable might sound better is that it is going to add some more distortion to the records, or not track them as well, which you might find pleasing for nostalgic reasons.

Do’t forget to share this post !

Was this helpful?

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top